230V SINGLE PHASE INDUCTIVE (SHUNT) REACTOR
Shunt reactors are used where the inductive load is needed and are connected to the system in parallel.
They are especially used in the long transmission lines, lighting and to compansate the capacitive, reactive energy produced by UPS’s.
They are used in the test environments where inductive current is needed.
BENEFITS OF REACTOR
-
Increases the Active power enegry flow.
-
The devices and machines which are fed from the system, become healthier and long lasting.
-
Reactive energy cost is not gonna be paid, so it provides energy saving.
-
Reduces the cost of investment.
TECHNICAL SPECIFICATIONS
| Standards |
IEC 60076-6/60289/61558-2-20 |
| Busbar Voltage |
230VAC – 1000VAC |
| Power |
0.10kVar – 12.5kVar |
| Energy Frequency |
50 – 60Hz |
| Inductance Settings |
± %4 |
| Insulation Test |
3.0Kv 1 min |
| Insulating Class |
F – 155 C |
| Protection Class |
IP 00 |
| Transformer Plate |
1.50 w/kg Silisli Sac |
| Contact Thermostat |
120 ºC |
| Application |
Closed Area |
| Ambient Temperature |
-15 ºC / +40 ºC |
| Cooling |
Natural (Air Cooling) |
| Design |
Air-Gap |
| Connector |
Terminal – Busbar |
| Winding Material |
AL-CU |
SELECTION TABLE
SELECTION TABLE OF STAGED REACTOR
